What instructions were you following?
dtoverlay=gpio-shutdown and enable_uart=1 are not going to affect an LED attached to pins 5&6.
Maybe it's this one:
https://blog.ricovandevin.com/adding-a- ... 398904ab19
In which case the LED needs to be on GPIO 14 (pin 8).
dtoverlay=gpio-shutdown and enable_uart=1 are not going to affect an LED attached to pins 5&6.
Maybe it's this one:
https://blog.ricovandevin.com/adding-a- ... 398904ab19
In which case the LED needs to be on GPIO 14 (pin 8).
Statistics: Posted by ame — Thu Mar 06, 2025 4:26 am