IIRC that doesn't set the generation. It just enables it at the default i.e. gen 2.Did you dislodge or damage the PCIe ribbon cable that goes from the Pineberry board to the Pi 5?
Are you running this at PCIe 3.0 speed? /boot/firmware/config.txt will have dtparam=pciex1_gen=3 if its 3.0.
The PCIe cable is fine and has not been disconnected and everything works perfectly now without wifi.
Runs in GEN 1 mode
dtparam=pciex1
Statistics: Posted by thagrol — Wed Feb 07, 2024 7:24 pm