I am using a ASM1806 4-Port PCIe switch, I tested it on x86 pc, all disk port are working fine. But raspberry pi 5, nvme on port 0 shows in lspci but not lsblk
I am not familiar with pcie/nvme driver, but I noticed there no driver in use and Latency element in lspci -vvv node 0001:03:00.0(pcie switch port 0), Not sure it's related
dmesg out, I truncated some lines. full log included in attachments
lspci -vvv log:
lspci -tv output:
lsblk output:
dtoverlay used:
realted kernel command line added:
I am not familiar with pcie/nvme driver, but I noticed there no driver in use and Latency element in lspci -vvv node 0001:03:00.0(pcie switch port 0), Not sure it's related
dmesg out, I truncated some lines. full log included in attachments
Code:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1][ 0.000000] Linux version 6.12.25-v8-16k+ (qizhou@raspberrypi) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #5 SMP PREEMPT Mon Apr 28 21:34:16 CST 2025[ 0.000000] KASLR enabled[ 0.000000] random: crng init done[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0[ 0.000000] efi: UEFI not found.[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000032000000, size 192 MiB[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool[ 0.000000] OF: reserved mem: 0x0000000032000000..0x000000003dffffff (196608 KiB) map reusable linux,cma[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0[ 0.000000] OF: reserved mem: 0x000000003fd16660..0x000000003fd1669d (0 KiB) nomap non-reusable nvram@0[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ffffffff][ 0.000000] Faking node 0 at [mem 0x0000000000000000-0x000000001fffffff] (512MB)[ 0.000000] Faking node 1 at [mem 0x0000000020000000-0x000000003fffffff] (512MB)[ 0.000000] Faking node 2 at [mem 0x0000000040000000-0x000000005fffffff] (512MB)[ 0.000000] Faking node 3 at [mem 0x0000000060000000-0x000000007fffffff] (512MB)[ 0.000000] Faking node 4 at [mem 0x0000000080000000-0x000000009fffffff] (512MB)[ 0.000000] Faking node 5 at [mem 0x00000000a0000000-0x00000000bfffffff] (512MB)[ 0.000000] Faking node 6 at [mem 0x00000000c0000000-0x00000000dfffffff] (512MB)[ 0.000000] Faking node 7 at [mem 0x00000000e0000000-0x00000000ffffffff] (512MB)[ 0.000000] NUMA: Initialized distance table, cnt=8[ 0.000000] NODE_DATA(0) allocated [mem 0x1fffd200-0x1fffffff][ 0.000000] NODE_DATA(1) allocated [mem 0x3fbfd200-0x3fbfffff][ 0.000000] NODE_DATA(2) allocated [mem 0x5fffd200-0x5fffffff][ 0.000000] NODE_DATA(3) allocated [mem 0x7fffd200-0x7fffffff][ 0.000000] NODE_DATA(4) allocated [mem 0x9fffd200-0x9fffffff][ 0.000000] NODE_DATA(5) allocated [mem 0xbfffd200-0xbfffffff][ 0.000000] NODE_DATA(6) allocated [mem 0xdfffd200-0xdfffffff][ 0.000000] NODE_DATA(7) allocated [mem 0xffd9c800-0xffd9f5ff][ 0.000000] Zone ranges:[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff][ 0.000000] DMA32 empty[ 0.000000] Normal empty[ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff][ 0.000000] node 0: [mem 0x0000000000080000-0x000000001fffffff][ 0.000000] node 1: [mem 0x0000000020000000-0x000000003fbfffff][ 0.000000] node 2: [mem 0x0000000040000000-0x000000005fffffff][ 0.000000] node 3: [mem 0x0000000060000000-0x000000007fffffff][ 0.000000] node 4: [mem 0x0000000080000000-0x000000009fffffff][ 0.000000] node 5: [mem 0x00000000a0000000-0x00000000bfffffff][ 0.000000] node 6: [mem 0x00000000c0000000-0x00000000dfffffff][ 0.000000] node 7: [mem 0x00000000e0000000-0x00000000ffffffff][ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff][ 0.000000] Initmem setup node 1 [mem 0x0000000020000000-0x000000003fbfffff][ 0.000000] Initmem setup node 2 [mem 0x0000000040000000-0x000000005fffffff][ 0.000000] Initmem setup node 3 [mem 0x0000000060000000-0x000000007fffffff][ 0.000000] Initmem setup node 4 [mem 0x0000000080000000-0x000000009fffffff][ 0.000000] Initmem setup node 5 [mem 0x00000000a0000000-0x00000000bfffffff][ 0.000000] Initmem setup node 6 [mem 0x00000000c0000000-0x00000000dfffffff][ 0.000000] Initmem setup node 7 [mem 0x00000000e0000000-0x00000000ffffffff][ 0.000000] On node 2, zone DMA: 256 pages in unavailable ranges[ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.1 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.[ 0.000000] psci: SMC Calling Convention v1.2[ 0.000000] percpu: Embedded 15 pages/cpu s193368 r8192 d44200 u245760[ 0.000000] pcpu-alloc: s193368 r8192 d44200 u245760 alloc=15*16384[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0[ 0.000000] CPU features: detected: Virtualization Host Extensions[ 0.000000] CPU features: detected: Spectre-v4[ 0.000000] CPU features: detected: Spectre-BHB[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing[ 0.000000] alternatives: applying boot alternatives[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:01:17:8A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=a7df9f78-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=CN nvme_core.default_ps_max_latency_us=0 pcie_aspm=off pcie_port_pm=off[ 0.000000] cgroup: Disabling memory control group subsystem[ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7'[ 0.000000] PCIe ASPM is disabled[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.[ 0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7 [ 0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0 [ 0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1 [ 0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2 [ 0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3 [ 0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4 [ 0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5 [ 0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6 [ 0.000000] Built 8 zonelists, mobility grouping on. Total pages: 261888[ 0.000000] Policy zone: DMA[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8[ 0.000000] ftrace: allocating 44908 entries in 44 pages[ 0.000000] ftrace: allocated 44 pages with 3 groups[ 0.000000] rcu: Preemptible hierarchical RCU implementation.[ 0.000000] rcu: RCU event tracing is enabled.[ 0.000000] Trampoline variant of Tasks RCU enabled.[ 0.000000] Rude variant of Tasks RCU enabled.[ 0.000000] Tracing variant of Tasks RCU enabled.[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0[ 0.000000] Root IRQ handler: gic_handle_irq[ 0.000000] GIC: Using split EOI/Deactivate mode[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns[ 0.000092] Console: colour dummy device 80x25[ 0.000097] printk: legacy console [tty1] enabled[ 0.000169] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)[ 0.000173] pid_max: default: 32768 minimum: 301[ 0.000263] LSM: initializing lsm=capability[ 0.001042] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes, vmalloc)[ 0.001434] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes, vmalloc)[ 0.001467] Mount-cache hash table entries: 8192 (order: 2, 65536 bytes, vmalloc)[ 0.001478] Mountpoint-cache hash table entries: 8192 (order: 2, 65536 bytes, vmalloc)[ 0.016076] rcu: Hierarchical SRCU implementation.[ 0.016082] rcu: Max phase no-delay instances is 1000.[ 0.016126] Timer migration: 1 hierarchy levels; 8 children per group; 0 crossnode level[ 0.020327] EFI services will not be available.[ 0.024017] smp: Bringing up secondary CPUs ...[ 0.032115] Detected PIPT I-cache on CPU1[ 0.032151] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1][ 0.036085] Detected PIPT I-cache on CPU2[ 0.036113] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1][ 0.040142] Detected PIPT I-cache on CPU3[ 0.040161] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1][ 0.040189] smp: Brought up 8 nodes, 4 CPUs[ 0.040194] SMP: Total of 4 processors activated.[ 0.040195] CPU: All CPU(s) started at EL2[ 0.040197] CPU features: detected: 32-bit EL0 Support[ 0.040200] CPU features: detected: Data cache clean to the PoU not required for I/D coherence[ 0.040201] CPU features: detected: Common not Private translations[ 0.040202] CPU features: detected: CRC32 instructions[ 0.040205] CPU features: detected: RCpc load-acquire (LDAPR)[ 0.040206] CPU features: detected: LSE atomic instructions[ 0.040207] CPU features: detected: Privileged Access Never[ 0.040209] CPU features: detected: RAS Extension Support[ 0.040210] CPU features: detected: Speculative Store Bypassing Safe (SSBS)[ 0.040233] alternatives: applying system-wide alternatives[ 0.041649] CPU features: detected: Hardware dirty bit management on CPU0-3[ 0.041810] Memory: 3906368K/4190208K available (13952K kernel code, 2264K rwdata, 4800K rodata, 5440K init, 647K bss, 65568K reserved, 196608K cma-reserved)[ 0.041959] devtmpfs: initialized[ 0.043761] Enabled cp15_barrier support[ 0.043766] Enabled setend support[ 0.043800] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns[ 0.043805] futex hash table entries: 1024 (order: 2, 65536 bytes, vmalloc)[ 0.044091] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL[ 0.044095] 0 pages in range for non-PLT usage[ 0.044097] 129356 pages in range for PLT usage[ 0.044204] pinctrl core: initialized pinctrl subsystem[ 0.044341] DMI not present or invalid.[ 0.047605] NET: Registered PF_NETLINK/PF_ROUTE protocol family[ 0.047940] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations[ 0.047968] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations[ 0.047997] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations[ 0.048013] audit: initializing netlink subsys (disabled)[ 0.048065] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1[ 0.048174] thermal_sys: Registered thermal governor 'step_wise'[ 0.048183] cpuidle: using governor menu[ 0.048234] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.048254] ASID allocator initialised with 32768 entries[ 0.048478] Serial: AMBA PL011 UART driver[ 0.049197] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000[ 0.049356] bcm2835-mbox 107c013880.mailbox: mailbox enabled[ 0.049476] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3[ 0.049484] printk: legacy console [ttyAMA10] enabled[ 0.056039] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2025-03-19T13:41:26, variant start_cd[ 0.060040] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is cec1d3ae00000000000000000000000000000000[ 0.064977] /axi/pcie@1000110000: Fixed dependency cycle(s) with /axi/pcie@1000110000[ 0.065082] /axi/pcie@1000110000: Fixed dependency cycle(s) with /axi/pcie@1000110000[ 0.068710] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1[ 0.068961] iommu: Default domain type: Translated[ 0.068963] iommu: DMA domain TLB invalidation policy: strict mode[ 0.069080] SCSI subsystem initialized[ 0.069106] usbcore: registered new interface driver usbfs[ 0.069113] usbcore: registered new interface driver hub[ 0.069118] usbcore: registered new device driver usb[ 0.069184] pps_core: LinuxPPS API ver. 1 registered[ 0.069186] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.069188] PTP clock support registered[ 0.069430] vgaarb: loaded[ 0.069520] clocksource: Switched to clocksource arch_sys_counter[ 0.069635] VFS: Disk quotas dquot_6.6.0[ 0.069641] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)[ 0.070548] NET: Registered PF_INET protocol family[ 0.070636] IP idents hash table entries: 65536 (order: 5, 524288 bytes, vmalloc)[ 0.071439] tcp_listen_portaddr_hash hash table entries: 2048 (order: 1, 32768 bytes, vmalloc)[ 0.071455] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc)[ 0.071460] TCP established hash table entries: 32768 (order: 4, 262144 bytes, vmalloc)[ 0.071562] TCP bind hash table entries: 32768 (order: 6, 1048576 bytes, vmalloc)[ 0.071890] TCP: Hash tables configured (established 32768 bind 32768)[ 0.071963] MPTCP token hash table entries: 4096 (order: 2, 98304 bytes, vmalloc)[ 0.071989] UDP hash table entries: 2048 (order: 2, 65536 bytes, vmalloc)[ 0.072022] UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes, vmalloc)[ 0.072088] NET: Registered PF_UNIX/PF_LOCAL protocol family[ 0.072269] RPC: Registered named UNIX socket transport module.[ 0.072271] RPC: Registered udp transport module.[ 0.072272] RPC: Registered tcp transport module.[ 0.072274] RPC: Registered tcp-with-tls transport module.[ 0.072275] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.072279] PCI: CLS 0 bytes, default 64[ 0.077560] Trying to unpack rootfs image as initramfs...[ 0.082529] kvm [1]: nv: 554 coarse grained trap handlers[ 0.082614] kvm [1]: IPA Size Limit: 40 bits[ 0.082623] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)[ 0.082646] kvm [1]: vgic interrupt IRQ9[ 0.082657] kvm [1]: VHE mode initialized successfully[ 0.232076] Freeing initrd memory: 17584K[ 0.274668] Initialise system trusted keyrings[ 0.275033] workingset: timestamp_bits=42 max_order=18 bucket_order=0[ 0.279378] NFS: Registering the id_resolver key type[ 0.279384] Key type id_resolver registered[ 0.279386] Key type id_legacy registered[ 0.279395] nfs4filelayout_init: NFSv4 File Layout Driver Registering...[ 0.279398] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...[ 0.279587] Key type asymmetric registered[ 0.279589] Asymmetric key parser 'x509' registered[ 0.279612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)[ 0.283647] io scheduler mq-deadline registered[ 0.283649] io scheduler kyber registered[ 0.283662] io scheduler bfq registered[ 0.283969] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d510600, parent irq: 27)[ 0.284003] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7c502000, parent irq: 28)[ 0.284030] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508380, parent irq: 29)[ 0.284060] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508400, parent irq: 30)[ 0.284086] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 31)[ 0.284913] ledtrig-cpu: registered to indicate activity on CPUs[ 0.314632] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled[ 0.314907] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART[ 0.314947] serial serial0: tty port ttyS0 registered[ 0.315179] iproc-rng200 107d208000.rng: hwrng registered[ 0.315208] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)[ 0.315382] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe[ 0.316623] brd: module loaded[ 0.317442] loop: module loaded[ 0.317545] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver[ 0.317642] Loading iSCSI transport class v2.0-870.[ 0.318289] usbcore: registered new interface driver lan78xx[ 0.318295] usbcore: registered new interface driver smsc95xx[ 0.318340] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)[ 0.318354] dwc_otg: FIQ enabled[ 0.318355] dwc_otg: NAK holdoff enabled[ 0.318356] dwc_otg: FIQ split-transaction FSM enabled[ 0.318358] Module dwc_common_port init[ 0.318450] usbcore: registered new interface driver uas[ 0.318456] usbcore: registered new interface driver usb-storage[ 0.318516] mousedev: PS/2 mouse device common for all mice[ 0.325972] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0[ 0.327342] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 2025-04-28T16:26:31 UTC (1745857591)[ 0.327617] bcm2835-wdt bcm2835-wdt: Poweroff handler already present![ 0.327619] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer[ 0.329604] sdhci: Secure Digital Host Controller Interface driver[ 0.329606] sdhci: Copyright(c) Pierre Ossman[ 0.329633] sdhci-pltfm: SDHCI platform and OF driver helper[ 0.329694] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....[ 0.329702] hid: raw HID events driver (C) Jiri Kosina[ 0.329714] usbcore: registered new interface driver usbhid[ 0.329715] usbhid: USB HID core driver[ 0.329985] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available[ 0.330194] NET: Registered PF_PACKET protocol family[ 0.330218] Key type dns_resolver registered[ 0.333587] registered taskstats version 1[ 0.333649] Loading compiled-in X.509 certificates[ 0.335055] Demotion targets for Node 0: null[ 0.335057] Demotion targets for Node 1: null[ 0.335058] Demotion targets for Node 2: null[ 0.335059] Demotion targets for Node 3: null[ 0.335060] Demotion targets for Node 4: null[ 0.335061] Demotion targets for Node 5: null[ 0.335062] Demotion targets for Node 6: null[ 0.335063] Demotion targets for Node 7: null[ 0.335213] Key type .fscrypt registered[ 0.335216] Key type fscrypt-provisioning registered[ 0.336062] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:[ 0.336066] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@1000110000, using [bus 00-ff][ 0.336074] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000[ 0.336078] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000[ 0.336084] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000[ 0.336088] brcm-pcie 1000110000.pcie: IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000[ 0.337463] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00[ 0.337466] pci_bus 0001:00: root bus resource [bus 00-ff][ 0.337469] pci_bus 0001:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])[ 0.337471] pci_bus 0001:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])[ 0.337483] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port[ 0.337489] pci 0001:00:00.0: PCI bridge to [bus 00][ 0.337491] pci 0001:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff][ 0.337494] pci 0001:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff 64bit pref][ 0.337510] pci 0001:00:00.0: PME# supported from D0 D3hot[ 0.338099] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 0.441525] brcm-pcie 1000110000.pcie: clkreq-mode set to safe[ 0.441527] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC)[ 0.441548] pci 0001:01:00.0: [1b21:1806] type 01 class 0x060400 PCIe Switch Upstream Port[ 0.441571] pci 0001:01:00.0: PCI bridge to [bus 00][ 0.441578] pci 0001:01:00.0: bridge window [io 0x0000-0x0fff][ 0.441582] pci 0001:01:00.0: bridge window [mem 0x1b00000000-0x1b000fffff][ 0.441593] pci 0001:01:00.0: bridge window [mem 0x1b00000000-0x1b000fffff 64bit pref][ 0.441605] pci 0001:01:00.0: enabling Extended Tags[ 0.441715] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold[ 0.441776] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)[ 0.441866] pci 0001:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 0.441933] pci 0001:02:00.0: [1b21:1806] type 01 class 0x060400 PCIe Switch Downstream Port[ 0.441963] pci 0001:02:00.0: PCI bridge to [bus 00][ 0.441969] pci 0001:02:00.0: bridge window [io 0x0000-0x0fff][ 0.441973] pci 0001:02:00.0: bridge window [mem 0x1b00000000-0x1b000fffff][ 0.441983] pci 0001:02:00.0: bridge window [mem 0x1b00000000-0x1b000fffff 64bit pref][ 0.441997] pci 0001:02:00.0: enabling Extended Tags[ 0.442086] pci 0001:02:00.0: PME# supported from D0 D3hot D3cold[ 0.442281] pci 0001:02:02.0: [1b21:1806] type 01 class 0x060400 PCIe Switch Downstream Port[ 0.442324] pci 0001:02:02.0: PCI bridge to [bus 00][ 0.442330] pci 0001:02:02.0: bridge window [io 0x0000-0x0fff][ 0.442334] pci 0001:02:02.0: bridge window [mem 0x1b00000000-0x1b000fffff][ 0.442344] pci 0001:02:02.0: bridge window [mem 0x1b00000000-0x1b000fffff 64bit pref][ 0.442364] pci 0001:02:02.0: enabling Extended Tags[ 0.442467] pci 0001:02:02.0: PME# supported from D0 D3hot D3cold[ 0.442651] pci 0001:02:06.0: [1b21:1806] type 01 class 0x060400 PCIe Switch Downstream Port[ 0.442680] pci 0001:02:06.0: PCI bridge to [bus 00][ 0.442686] pci 0001:02:06.0: bridge window [io 0x0000-0x0fff][ 0.442689] pci 0001:02:06.0: bridge window [mem 0x1b00000000-0x1b000fffff][ 0.442701] pci 0001:02:06.0: bridge window [mem 0x1b00000000-0x1b000fffff 64bit pref][ 0.442715] pci 0001:02:06.0: enabling Extended Tags[ 0.442809] pci 0001:02:06.0: PME# supported from D0 D3hot D3cold[ 0.443067] pci 0001:02:0e.0: [1b21:1806] type 01 class 0x060400 PCIe Switch Downstream Port[ 0.443089] pci 0001:02:0e.0: PCI bridge to [bus 00][ 0.443095] pci 0001:02:0e.0: bridge window [io 0x0000-0x0fff][ 0.443098] pci 0001:02:0e.0: bridge window [mem 0x1b00000000-0x1b000fffff][ 0.443108] pci 0001:02:0e.0: bridge window [mem 0x1b00000000-0x1b000fffff 64bit pref][ 0.443122] pci 0001:02:0e.0: enabling Extended Tags[ 0.443203] pci 0001:02:0e.0: PME# supported from D0 D3hot D3cold[ 0.443631] pci 0001:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 0.443645] pci 0001:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 0.443653] pci 0001:02:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 0.443660] pci 0001:02:0e.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 0.443733] pci 0001:03:00.0: [2646:5016] type 00 class 0x010802 PCIe Endpoint[ 0.443757] pci 0001:03:00.0: BAR 0 [mem 0x1b00000000-0x1b00003fff 64bit][ 0.444017] pci 0001:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)[ 0.444147] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03[ 0.444228] pci 0001:04:00.0: [2646:5016] type 00 class 0x010802 PCIe Endpoint[ 0.444251] pci 0001:04:00.0: BAR 0 [mem 0x1b00000000-0x1b00003fff 64bit][ 0.444526] pci 0001:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)[ 0.444652] pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04[ 0.444726] pci 0001:05:00.0: [2646:500d] type 00 class 0x010802 PCIe Endpoint[ 0.444751] pci 0001:05:00.0: BAR 0 [mem 0x1b00000000-0x1b00003fff 64bit][ 0.444972] pci 0001:05:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)[ 0.445068] pci_bus 0001:05: busn_res: [bus 05-ff] end is updated to 05[ 0.445127] pci_bus 0001:06: busn_res: [bus 06-ff] end is updated to 06[ 0.445132] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 06[ 0.445136] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 06[ 0.445139] pci 0001:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000[ 0.445142] pci 0001:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000[ 0.445146] pci 0001:02:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 03] add_size 100000 add_align 100000[ 0.445149] pci 0001:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-06] add_size 1000[ 0.445152] pci 0001:01:00.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 02-06] add_size 200000 add_align 100000[ 0.445155] pci 0001:01:00.0: bridge window [mem 0x00100000-0x003fffff] to [bus 02-06] add_size 100000 add_align 100000[ 0.445157] pci 0001:00:00.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 01-06] add_size 200000 add_align 100000[ 0.445159] pci 0001:00:00.0: bridge window [mem 0x00100000-0x003fffff] to [bus 01-06] add_size 100000 add_align 100000[ 0.445164] pci 0001:00:00.0: bridge window [mem 0x1b00000000-0x1b003fffff]: assigned[ 0.445167] pci 0001:00:00.0: bridge window [mem 0x1800000000-0x18002fffff 64bit pref]: assigned[ 0.445169] pci 0001:01:00.0: bridge window [mem 0x1b00000000-0x1b003fffff]: assigned[ 0.445171] pci 0001:01:00.0: bridge window [mem 0x1800000000-0x18002fffff 64bit pref]: assigned[ 0.445173] pci 0001:01:00.0: bridge window [io size 0x1000]: can't assign; no space[ 0.445175] pci 0001:01:00.0: bridge window [io size 0x1000]: failed to assign[ 0.445177] pci 0001:01:00.0: bridge window [io size 0x1000]: can't assign; no space[ 0.445179] pci 0001:01:00.0: bridge window [io size 0x1000]: failed to assign[ 0.445182] pci 0001:02:00.0: bridge window [mem 0x1b00000000-0x1b001fffff]: assigned[ 0.445184] pci 0001:02:00.0: bridge window [mem 0x1800000000-0x18001fffff 64bit pref]: assigned[ 0.445186] pci 0001:02:02.0: bridge window [mem 0x1b00200000-0x1b002fffff]: assigned[ 0.445187] pci 0001:02:06.0: bridge window [mem 0x1b00300000-0x1b003fffff]: assigned[ 0.445189] pci 0001:02:00.0: bridge window [io size 0x1000]: can't assign; no space[ 0.445191] pci 0001:02:00.0: bridge window [io size 0x1000]: failed to assign[ 0.445193] pci 0001:02:00.0: bridge window [io size 0x1000]: can't assign; no space[ 0.445194] pci 0001:02:00.0: bridge window [io size 0x1000]: failed to assign[ 0.445196] pci 0001:03:00.0: BAR 0 [mem 0x1b00000000-0x1b00003fff 64bit]: assigned[ 0.445207] pci 0001:02:00.0: PCI bridge to [bus 03][ 0.445212] pci 0001:02:00.0: bridge window [mem 0x1b00000000-0x1b001fffff][ 0.445215] pci 0001:02:00.0: bridge window [mem 0x1800000000-0x18001fffff 64bit pref][ 0.445228] pci 0001:04:00.0: BAR 0 [mem 0x1b00200000-0x1b00203fff 64bit]: assigned[ 0.445239] pci 0001:02:02.0: PCI bridge to [bus 04][ 0.445244] pci 0001:02:02.0: bridge window [mem 0x1b00200000-0x1b002fffff][ 0.445251] pci 0001:05:00.0: BAR 0 [mem 0x1b00300000-0x1b00303fff 64bit]: assigned[ 0.445271] pci 0001:02:06.0: PCI bridge to [bus 05][ 0.445275] pci 0001:02:06.0: bridge window [mem 0x1b00300000-0x1b003fffff][ 0.445290] pci 0001:02:0e.0: PCI bridge to [bus 06][ 0.445299] pci 0001:01:00.0: PCI bridge to [bus 02-06][ 0.445303] pci 0001:01:00.0: bridge window [mem 0x1b00000000-0x1b003fffff][ 0.445306] pci 0001:01:00.0: bridge window [mem 0x1800000000-0x18002fffff 64bit pref][ 0.445310] pci 0001:00:00.0: PCI bridge to [bus 01-06][ 0.445312] pci 0001:00:00.0: bridge window [mem 0x1b00000000-0x1b003fffff][ 0.445314] pci 0001:00:00.0: bridge window [mem 0x1800000000-0x18002fffff 64bit pref][ 0.445316] pci_bus 0001:00: resource 4 [mem 0x1b00000000-0x1bfffffffb][ 0.445318] pci_bus 0001:00: resource 5 [mem 0x1800000000-0x1affffffff pref][ 0.445320] pci_bus 0001:01: resource 1 [mem 0x1b00000000-0x1b003fffff][ 0.445322] pci_bus 0001:01: resource 2 [mem 0x1800000000-0x18002fffff 64bit pref][ 0.445324] pci_bus 0001:02: resource 1 [mem 0x1b00000000-0x1b003fffff][ 0.445325] pci_bus 0001:02: resource 2 [mem 0x1800000000-0x18002fffff 64bit pref][ 0.445327] pci_bus 0001:03: resource 1 [mem 0x1b00000000-0x1b001fffff][ 0.445329] pci_bus 0001:03: resource 2 [mem 0x1800000000-0x18001fffff 64bit pref][ 0.445331] pci_bus 0001:04: resource 1 [mem 0x1b00200000-0x1b002fffff][ 0.445332] pci_bus 0001:05: resource 1 [mem 0x1b00300000-0x1b003fffff][ 0.445336] pci 0001:00:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445342] pci 0001:01:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445349] pci 0001:02:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445359] pci 0001:03:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445365] pci 0001:02:02.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445375] pci 0001:04:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445382] pci 0001:02:06.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445399] pci 0001:05:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512[ 0.445406] pci 0001:02:0e.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512[ 0.445459] pcieport 0001:00:00.0: enabling device (0000 -> 0002)[ 0.445483] pcieport 0001:00:00.0: PME: Signaling with IRQ 39[ 0.445534] pcieport 0001:00:00.0: AER: enabled with IRQ 39[ 0.445579] pcieport 0001:01:00.0: enabling device (0000 -> 0002)[ 0.445690] pcieport 0001:02:00.0: enabling device (0000 -> 0002)[ 0.445872] pcieport 0001:02:02.0: enabling device (0000 -> 0002)[ 0.446011] pcieport 0001:02:06.0: enabling device (0000 -> 0002)[ 0.446396] nvme nvme0: pci function 0001:03:00.0[ 0.446401] nvme 0001:03:00.0: enabling device (0000 -> 0002)[ 0.497978] nvme nvme0: pci function 0001:04:00.0[ 0.497983] nvme 0001:04:00.0: enabling device (0000 -> 0002)[ 0.546087] hwmon hwmon1: temp1_input not attached to any thermal zone[ 0.546103] hwmon hwmon1: temp2_input not attached to any thermal zone[ 0.547446] nvme nvme0: allocated 64 MiB host memory buffer.[ 0.606045] nvme nvme0: 4/0/0 default/read/poll queues[ 0.611154] nvme nvme1: pci function 0001:05:00.0[ 0.611162] nvme 0001:05:00.0: enabling device (0000 -> 0002)[ 0.622948] nvme nvme1: missing or invalid SUBNQN field.[ 0.629629] hwmon hwmon2: temp1_input not attached to any thermal zone[ 0.631249] nvme nvme1: 4/0/0 default/read/poll queues[ 0.636504] nvme1n1: p1[ 0.636643] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:[ 0.636647] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@1000120000, using [bus 00-ff][ 0.636654] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000[ 0.636658] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000[ 0.636664] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000[ 0.636668] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000[ 0.636672] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000[ 0.637827] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00[ 0.637832] pci_bus 0002:00: root bus resource [bus 00-ff][ 0.637834] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])[ 0.637837] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])[ 0.637847] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port[ 0.637852] pci 0002:00:00.0: PCI bridge to [bus 00][ 0.637855] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff][ 0.637871] pci 0002:00:00.0: PME# supported from D0 D3hot[ 0.638480] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 0.741523] brcm-pcie 1000120000.pcie: clkreq-mode set to default[ 0.741525] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)[ 0.741544] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint[ 0.741556] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff][ 0.741562] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff][ 0.741568] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff][ 0.741632] pci 0002:01:00.0: supports D1[ 0.741633] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold[ 0.741699] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01[ 0.741707] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]: assigned[ 0.741710] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned[ 0.741714] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned[ 0.741718] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned[ 0.741722] pci 0002:00:00.0: PCI bridge to [bus 01][ 0.741724] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff][ 0.741727] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb][ 0.741729] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref][ 0.741730] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f005fffff][ 0.741733] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512[ 0.741740] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512[ 0.741788] pcieport 0002:00:00.0: enabling device (0000 -> 0002)[ 0.741810] pcieport 0002:00:00.0: PME: Signaling with IRQ 55[ 0.741865] pcieport 0002:00:00.0: AER: enabled with IRQ 55[ 0.741922] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200[ 0.741925] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200[ 0.741930] rp1 0002:01:00.0: enabling device (0000 -> 0002)[ 0.742540] rp1 0002:01:00.0: chip_id 0x20001927[ 0.746633] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 117[ 0.760980] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 123 (2c:cf:67:01:17:8a)[ 0.761773] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels[ 0.761985] xhci-hcd xhci-hcd.0: xHCI Host Controller...[ 1.380157] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none....[ 2.151136] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none....[ 3.353703] EXT4-fs (mmcblk0p3): mounted filesystem 376b7590-73d7-4a15-b7b0-11a798277a86 r/w with ordered data mode. Quota mode: none....[ 3.804166] nvme nvme0: using unchecked data buffer...Code:
0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) (prog-if 00 [Normal decode])Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 39Bus: primary=00, secondary=01, subordinate=06, sec-latency=0Memory behind bridge: 00000000-003fffff [size=4M] [32-bit]Prefetchable memory behind bridge: 1800000000-18002fffff [size=3M] [32-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-BridgeCtl: Parity- SERR- NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-Capabilities: <access denied>Kernel driver in use: pcieport0001:01:00.0 PCI bridge: ASMedia Technology Inc. ASM1806 4-Port PCIe x2 Gen2 Packet Switch (rev 01) (prog-if 00 [Normal decode])Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 39Bus: primary=01, secondary=02, subordinate=06, sec-latency=0I/O behind bridge: 0000f000-00000fff [disabled] [32-bit]Memory behind bridge: 00000000-003fffff [size=4M] [32-bit]Prefetchable memory behind bridge: 1800000000-18002fffff [size=3M] [32-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-Capabilities: <access denied>Kernel driver in use: pcieport0001:02:00.0 PCI bridge: ASMedia Technology Inc. ASM1806 4-Port PCIe x2 Gen2 Packet Switch (rev 01) (prog-if 00 [Normal decode])Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 40Bus: primary=02, secondary=03, subordinate=03, sec-latency=0I/O behind bridge: 0000f000-00000fff [disabled] [32-bit]Memory behind bridge: 00000000-001fffff [size=2M] [32-bit]Prefetchable memory behind bridge: 1800000000-18001fffff [size=2M] [32-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-Capabilities: <access denied>Kernel driver in use: pcieport0001:02:02.0 PCI bridge: ASMedia Technology Inc. ASM1806 4-Port PCIe x2 Gen2 Packet Switch (rev 01) (prog-if 00 [Normal decode])Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 42Bus: primary=02, secondary=04, subordinate=04, sec-latency=0I/O behind bridge: 0000f000-00000fff [disabled] [32-bit]Memory behind bridge: 00200000-002fffff [size=1M] [32-bit]Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled] [64-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-Capabilities: <access denied>Kernel driver in use: pcieport0001:02:06.0 PCI bridge: ASMedia Technology Inc. ASM1806 4-Port PCIe x2 Gen2 Packet Switch (rev 01) (prog-if 00 [Normal decode])Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 43Bus: primary=02, secondary=05, subordinate=05, sec-latency=0I/O behind bridge: 0000f000-00000fff [disabled] [32-bit]Memory behind bridge: 00300000-003fffff [size=1M] [32-bit]Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled] [64-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-Capabilities: <access denied>Kernel driver in use: pcieport0001:02:0e.0 PCI bridge: ASMedia Technology Inc. ASM1806 4-Port PCIe x2 Gen2 Packet Switch (rev 01) (prog-if 00 [Normal decode])Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 44Bus: primary=02, secondary=06, subordinate=06, sec-latency=0I/O behind bridge: 0000f000-00000fff [disabled] [32-bit]Memory behind bridge: fff00000-000fffff [disabled] [32-bit]Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled] [64-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-Capabilities: <access denied>Kernel driver in use: pcieport0001:03:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. OM3PGP4 NVMe SSD (rev 01) (prog-if 02 [NVM Express])Subsystem: Kingston Technology Company, Inc. OM3PGP4 NVMe SSDControl: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Interrupt: pin A routed to IRQ 39Region 0: Memory at 1b00000000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied>0001:04:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. OM3PGP4 NVMe SSD (rev 01) (prog-if 02 [NVM Express])Subsystem: Kingston Technology Company, Inc. OM3PGP4 NVMe SSDControl: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 41Region 0: Memory at 1b00200000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied>Kernel driver in use: nvme0001:05:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. OM3PDP3 NVMe SSD (rev 01) (prog-if 02 [NVM Express])Subsystem: Kingston Technology Company, Inc. OM3PDP3 NVMe SSDControl: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 41Region 0: Memory at 1b00300000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied>Kernel driver in use: nvme0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) (prog-if 00 [Normal decode])Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 55Bus: primary=00, secondary=01, subordinate=01, sec-latency=0Memory behind bridge: 00000000-005fffff [size=6M] [32-bit]Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled] [64-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR- NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-Capabilities: <access denied>Kernel driver in use: pcieport0002:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South BridgeControl: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0Interrupt: pin A routed to IRQ 55Region 0: Memory at 1f00410000 (32-bit, non-prefetchable) [size=16K]Region 1: Memory at 1f00000000 (32-bit, non-prefetchable) [virtual] [size=4M]Region 2: Memory at 1f00400000 (32-bit, non-prefetchable) [size=64K]Capabilities: <access denied>Kernel driver in use: rp1Code:
-+-[0000:00]- +-[0001:00]---00.0-[01-06]----00.0-[02-06]--+-00.0-[03]----00.0 Kingston Technology Company, Inc. OM3PGP4 NVMe SSD | +-02.0-[04]----00.0 Kingston Technology Company, Inc. OM3PGP4 NVMe SSD | +-06.0-[05]----00.0 Kingston Technology Company, Inc. OM3PDP3 NVMe SSD | \-0e.0-[06]-- \-[0002:00]---00.0-[01]----00.0 Raspberry Pi Ltd RP1 PCIe 2.0 South BridgeCode:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTSmmcblk0 179:0 0 58G 0 disk ├─mmcblk0p1 179:1 0 512M 0 part /boot/firmware├─mmcblk0p2 179:2 0 30G 0 part /└─mmcblk0p3 179:3 0 27.4G 0 part /homenvme0n1 259:0 0 119.2G 0 disk nvme1n1 259:1 0 119.2G 0 disk └─nvme1n1p1 259:2 0 119.2G 0 part /mnt/nvCode:
dtparam=pcie-32bit-dma-pi5dtoverlay=pciex1-compat-pi5,no-mipCode:
nvme_core.default_ps_max_latency_us=0 pcie_aspm=off pcie_port_pm=offStatistics: Posted by atmgnd — Tue Apr 29, 2025 2:17 am